Abstract:
Usage of biomass-derived carbon in supercapacitors is increasing, and specific capacitance is a key
parameter to consider. In this study, non-activated carbon was prepared using respiratory roots of
Avicennia marina with the aim of developing a supercapacitor with high specific capacitance based on
the fact that A. marina roots are rich in carbon and porous in structure. The roots were cut, washed and
dried, then pyrolyzed in a nitrogen atmosphere at different temperatures of 500°C, 600°C and 700°C.
The obtained carbon was ground using a mortar and pestle and mixed with PVDF at a carbon to PVDF
mass ratio of 9:1 with N-Methyl-2-pyrrolidone (NMP) as the solvent. The slurry was coated on FTO
glasses using the Doctor Blade method, and the prepared electrodes were dried at 80°C for 6 hours. The
electrodes were characterized using cyclic voltammetry using a Pt plate as counter electrode, Ag/AgCl
as reference electrode and 1 M Sodium perchlorate aqueous solution as the electrolyte. For the carbon
pyrolyzed at each temperature, CV curves were taken at varying scan rates. The same set of tests was
carried out for non-activated coconut shell derived carbon as a benchmark. The specific capacitance of
supercapacitors made of both A. marina and coconut shell carbon increased with increasing pyrolysis
temperature, and at 700°C, mangrove carbon gave a specific capacitance of 3.59 F/g while coconut
shell carbon exhibited 0.36 F/g under the potential difference of 1 volt and scan rate of 5 mV/s. This
indicates that non-activated carbon derived from A. marina roots exhibits nearly ten times higher
specific capacitance than the benchmark non-activated coconut shell derived carbon. Hence, it provides
a promising potential for further development and optimization of A. marina root derived carbon for
supercapacitor electrode applications in future work.
